EPC Compliance
    6 min read

    Best Upgrades for EPC Compliance in Rentals

    David Rabee, Co-Founder

    By David Rabee

    Co-Founder

    Best Upgrades for EPC Compliance in Rentals

    A low EPC rating can turn a routine re-let, refinance or purchase into a rushed capital project. The best upgrades for EPC compliance are rarely the most visible ones. They are the measures that address the property’s biggest heat losses, score well in the EPC methodology and can be delivered without creating an unnecessary void.

    For landlords, the commercial question is not simply how to achieve a better letter. It is how to spend capital where it has the strongest effect on compliance, tenant comfort, running costs and long-term rental appeal. The right answer depends on the age, construction and existing specification of each property.

    Start with the EPC, not the showroom

    An EPC is based on a standardised assessment of the home, including its insulation, heating system, glazing, lighting and renewable technology. That means a beautiful refurbishment will not automatically improve the rating. New kitchen units, décor and most cosmetic work may help lettability, but they do little for EPC compliance.

    Read the recommendation report alongside the certificate before commissioning work. Check the assumed construction, heating fuel and insulation levels. If information was unavailable when the assessor visited, the report may use default assumptions that make the property appear less efficient than it really is.

    This is particularly relevant for older terraces, converted flats and properties with non-standard construction. Evidence of existing insulation, such as installation certificates or clear documentation from previous works, may support a more accurate reassessment. Do not assume the current rating tells the whole story, but do not rely on a reassessment alone to solve a genuine performance gap.

    In England and Wales, most privately rented homes need an EPC rating of E or above unless a valid exemption applies. Rules, proposed future standards and local requirements can change, while Scotland operates under a separate framework. Check the position for the property and tenancy before making decisions, especially when buying or planning a major refurbishment.

    The upgrades that usually make the biggest difference

    Loft insulation: often the clearest first move

    Where a house has an accessible loft and little or no insulation, topping it up is often one of the most cost-effective measures available. Heat rises, and an under-insulated roof can be a material weakness in an otherwise sound rental property.

    It is relatively quick work, usually causes limited disruption and can improve both the EPC and the tenant’s experience in winter. It is not always straightforward: roof ventilation, recessed lights, water tanks and boarding need proper treatment. Over-boarding a loft without preserving insulation depth can undo some of the benefit.

    For top-floor flats, establish whether the loft sits within the demise or is controlled by the freeholder. Consent and access can determine whether an apparently simple measure is actually viable.

    Cavity wall insulation: high impact where suitable

    Cavity wall insulation can deliver a meaningful improvement in homes built with suitable unfilled cavities. It is commonly relevant to properties from the interwar period onwards, though construction varies and a survey is essential.

    The trade-off is moisture risk. Exposed locations, poor pointing, damaged render or unsuitable cavity conditions can make installation a bad decision. A failed insulation job is more expensive than a lower EPC score, so use an installer who assesses the wall condition rather than treating every cavity as an easy win.

    Solid wall insulation: effective, but plan it properly

    Solid-walled Victorian and older properties are often the difficult cases. Internal or external wall insulation can make a substantial difference, but it is more disruptive and considerably more expensive than loft or cavity work.

    Internal wall insulation reduces room sizes and may require skirtings, sockets, radiators and kitchen fittings to be moved. External insulation changes the appearance of the building and can raise planning, conservation area, boundary and detailing issues. It can be worthwhile during a full refurbishment or when the external finish already needs replacement. As a standalone response to a marginal EPC shortfall, it may not be the best first option.

    Improve the heating system and its controls

    An inefficient electric system, ageing boiler or limited heating controls can hold an EPC back. Replacing an old boiler with a modern efficient model, where gas remains appropriate, may improve the rating. Smart or programmable controls, thermostatic radiator valves and proper zoning can also help the assessor recognise how efficiently the home can be heated.

    For electrically heated flats, modern high-heat-retention storage heaters can be a marked improvement over older systems. Heat pumps may offer strong efficiency gains, but they need a property-wide view. Insulation levels, radiator sizing, hot-water provision, outdoor space, noise considerations and electrical capacity all matter.

    Do not install new heating equipment before considering fabric improvements. A well-insulated home needs less heat, may allow a smaller system and is easier to keep comfortable. In practical terms, deal with avoidable heat loss first, then choose the heating solution that suits the property.

    Windows: valuable, but not always the first spend

    Replacing single glazing can help comfort, reduce draughts and improve an EPC. Replacing older double glazing with newer double glazing, however, may deliver a smaller rating uplift than landlords expect for the cost.

    If windows are nearing the end of their life, replacement can make sense as part of a planned refurbishment. If they are sound, look first at loft insulation, wall insulation, heating controls and draught-proofing. In listed buildings or conservation areas, secondary glazing may be more acceptable than replacement windows, subject to the necessary permissions.

    Low-energy lighting and draught-proofing: small work, useful gains

    LED lighting is not likely to transform a poor rating on its own, but it is inexpensive, quick and should be standard across a rental portfolio. Draught-proofing around doors, loft hatches and appropriate window gaps can also improve comfort at modest cost.

    These are supporting measures, not substitutes for insulation or adequate heating. Their value is greatest when used to close the gap after larger improvements have addressed the major weaknesses.

    How to choose the best EPC compliance upgrades

    The most efficient plan is usually a staged one. First, identify the measures the EPC recommends and validate the property data. Next, obtain advice from installers or a suitably qualified professional where the work involves insulation, moisture risk, heating design or building alterations. Then compare the likely EPC gain against cost, disruption and the remaining life of the existing component.

    A boiler that is working reliably may not justify an immediate replacement solely for a small rating gain. Conversely, if it is likely to fail within two years, combining replacement with controls and fabric upgrades can prevent two periods of disruption and two sets of contractor costs.

    Portfolio landlords should also look for repeatable specifications. Standardising LED lamps, heating controls, loft insulation levels and evidence collection reduces delays between tenancies. Keep invoices, product specifications, photographs and certificates in a property file. The work only benefits the next EPC if the assessor can identify and evidence it correctly.

    Fund the work without holding up the tenancy

    EPC work often lands at the least convenient moment: between tenants, during an urgent sale, or when a lender, agent or prospective tenant has identified a problem. Waiting weeks for conventional borrowing can create a longer void and turn a manageable upgrade into a cashflow issue.

    Factored gives eligible landlords access to capital by purchasing future rental income rights - not by issuing a conventional loan. Funding of £10,000 to £50,000 per property can commonly be delivered within 24 hours, with soft credit checks only. That can help landlords schedule insulation, heating or refurbishment works when the property is available, rather than postponing essential compliance work.

    The key is to fund a defined plan, not a vague target. Price the works, allow for contingencies, confirm permissions where needed and book the follow-up EPC once the upgrades are complete. A quick source of capital is most useful when it protects the timetable and avoids spending on measures that do not move the rating.

    Do not forget the post-work assessment

    An EPC does not update automatically when the contractor leaves. Arrange a new assessment after the work is finished and make the documentation available to the assessor. If an expected improvement has not appeared, check whether the measure was entered correctly, whether supporting evidence was missing or whether another part of the property remains the limiting factor.

    The strongest EPC strategy is not necessarily the one with the biggest budget. It is the one that fixes the right weaknesses, preserves the property’s condition and keeps your next letting decision in your control.

    Ready to Access Your Rental Income?

    Get landlord funding within 24 hours with a 90% approval rate.

    Get Your Landlord Funding